Demo Mode Operation
Demo mode operation of GTXRaster CAD Series and GTXImage CAD Series products is expected
when it is used without the license provided by a HASP security key.
There are also times when errors or omissions in the installation
of a licensed product will result in Demo operation.
Detection of the Demo mode in the AutoCAD 14 and 2000 compatible
versions of GTX software will probably begin with an error message.
Several example message and possible causes follow this text.
Once in Demo mode a raster editing command will result in a
command line message similar to this:
Command: _GERASE
No raster image selected. Invoking gACTIVE command
In demo mode, image is limited to 1000 x 1000 pixels. Resizing
From Point:
Installation related license failures result in this message:
During the installation process a selection of the product level is made.
This choice is reflected in a variable that is written to the
GTXRAST.CFG file which is contained in the GTX software path.
The "ProductLevel=" variable should match the license version which
was purchased.
REM **Product level. Settings include RCAD, RCADPLUS, RTOOLS, R2V.**
ProductLevel=RCADPLUS
Demomode=NO
The following error message is similar to one which may be expected:
HASP Device Drivers Not Installed or NetHASP License Failure
The HASP device drivers should be installed to each computer
that is attached to a HASP key, and in the case of floating licenses
each client computer. If a numbered error message occurs, the
meaning of the number may be researched in the NHSRVW32.HLP
file under the title "NETHASP Error Codes".
Lack of drivers for a single user HASP key:
Lack of drivers for a floating license client computer:
|
