GTX logo
GTX
Facebook logo YouTube Logo
Home Register Products About Support Feedback
GTX Customer Support

Configure the GTX License Server System - GTXRaster CAD 2017 Series

Steps to Follow: 

  1. Download network licensing applications from the GTX website to the computer that will be hosting the license manager (License Server Host).
  2. Copy the GTXNET.LIC file to a path associated with the GTX vendor daemon. (c:\SoftwareLicenseActivation)
  3. Configure (LMTOOLS) and start the GTX vendor's service.
  4. Verify GTX vendor's service has started by reviewing the LMTOOLS log file.
  5. Add applications and daemons to firewall and security to allow TCP communication.
  6. Verify clients can access the license server.

Step 1: Download Network Licensing Applications


Download the latest version from Step #1 here: Network License Overview

The zip file (GtxFlexUtilities_32bit.zip or GtxFlexUtilities_64bit.zip) will contain all needed applications and files, including the GTX vendor daemon (gtxflex.exe).

Note that this the same set of network utilities that contain the GTX Registration Wizard, and you may have downloaded the utilities already when registering your server.

For the example below, a new folder was created called C:\SoftwareLicenseActivation, and the utilities file (GtxFlexUtilities_32bit.zip) was downloaded and unzipped in the new folder.

Note that the GTX vendor daemon (gtxflex.exe) must be in the same directory as the LMGRD.EXE utility. Using Flexera applications from another source will still require copying the GTX vendor daemon into the associated LMGRD.EXE directory.




Step 2: Copy the GTXNET.LIC file


Copy the GTXNET.LIC file to the licensing folder on your license manager server. Note that the GTXNET.LIC file must be in the same directory as the gtxflex.exe and LMGRD.EXE applications.

In the example below, the GTXNET.LIC file was copied into the C:\SoftwareLicenseActivation\ folder as that is where the applications reside.



Step 3: Configure and start the GTX vendor's service


Upon receiving a GTXNET.LIC file from GTX, start the LMTOOLS.EXE program on the computer which was selected to serve as the License Server System. From the Config Services tab overwrite any existing Service Name with an appropriate name for the GTX service. That will add a new service and open all other fields for new entries.

Following this sample image, browse to and select the paths to the LMGRD.EXE, the GTXNET.LIC, and a log file, which must be originated. Place the check marks for Start Server at Power Up and Use Services, at the bottom of the Config Services window. Then press the Save Service button.

Select the Service/License File tab, with the FLEXnet service for GTX name highlighted, set the Configuration using Services as the active choice.

Select the Start/Stop/Reread tab, with the FLEXnet service for GTX name highlighted, press the Start Server button. The bottom, status line, of this window provides clues to the success or failure of the server start attempt.


Step 4: Verify GTX vendor's service


The View Log control, under the Config Services tab, displays the Log viewer. This reveals the starting or stopping status of the LMGRD license server manager, and the GTXFLEX daemon. It will also show the GTXRaster CAD 2017 Series program feature(s), (PWN2000 or RWN2000) assigned by the GTXNET.LIC to serve licenses on the Host Server computer.


Step 5: Add applications and daemons to firewall and security


The main reason a client computer cannot receive a network license is the server firewall is not properly setup to allow TCP communication between the client computer and the license server.

Please review the firewall and security settings here:



Step 6: Verify clients can access the license server


The GTX.LIC client license file must be copied to the product installation folder on each client computer. The license file points to the license server host.

Users should now be able to run their product and receive licenses from the license server. Note that the server license file is named gtxnet.lic and the client license file is named gtx.lic. The LMTUIL application can also be used to verify the license server:



Return to RCAD 2017 Licensing Page
Return to main software licensing support page


Footer bullet1 Footer bullet2 Footer bullet3

Copyright 2017 GTX. All Rights Reserved.
GTXScanClean is protected by U.S. Patent No. 7,016,536

GTX Europe, Ltd. • Unit 9A, Intec 2 • Wade Road, • Basingstoke, Hampshire
United Kingdom RG24 8NE • tel: +44 (0)1256.814444 • fax: +44 (0)1256.364887 • email: info@gtx.co.uk/info@gtx.com
(UK registration information • Company: GTX Europe Ltd. • Registered Number: 2156326 • Place of registration: England)

r2v raster to vector tiff cals g4 raster to vector paper to cad paper to cad paper to cad tiff view markup redline view markup redline view markup redline vectorization vectorisation vectorization vectorisation vectorization vectorisation R2V GTXRaster CAD GTXRaster Trace GTXRaster CAD Plus GTXRaster R2V GTXImage CAD GTXImage Tools scanclean ScanClean GTXScan Clean Rastercad rastertrace rastercad plus raster r2v v2r rasterization rasterisation rasterization rasterisation rasterization rasterisation Redlining Markup